In Fluid Inspections & Changes
lube stop tire lacombe oil change lube services fluid inspections changes flush fill diesel exhaust fluid changes

What is a Diesel Exhaust Fluid Changes service?

Lube Stop’s Diesel Exhaust Fluid Changes service is the replenishment of the diesel exhaust which is a non-hazardous solution made of urea and-ionized water.  Its job is to reduce bad emissions in the exhaust and improve fuel efficiency.  This fluid is sprayed into the exhaust stream of diesel vehicles to break down dangerous nitrogen oxides emissions into harmless nitrogen and water to achieve optimum performance.  Keep in mind that this fluid is not a fuel additive and never comes into contact with diesel.  It is stored in a separate tank, typically with a blue filler cap.  It is required by environmental laws.

If your fluid is dirty or contaminated, it doesn’t circulate as well as it should.  That makes it ineffective at its filtering job.  That’s why you have it changed or flushed.

Lube Stop provides this service as needed.  To determine if it is needed, we look for signs that the fluid is contaminated or low.  So, a visual inspection to detect pollutants or leaking from the exhaust is done.  Following that, Lube Stop also inspects for grinding or knocking exhaust noise, steam or odd odour from your exhaust, gas pedal vibrations, and decreased fuel efficiency.  If they are present, we recommend replacing the fluid to the customer.  If the customer agrees, then we proceed with the Diesel Exhaust Fluid Changes or Flush service.

So, always bring any indicators of trouble to the attention of our Lube Stop technicians.  These include signs of strange exhaust steam or leakage, loud engine rumbling, gas pedal vibrations, and a decrease in fuel efficiency.  From there, we will trouble shoot and determine if you need to change or flush your fluid.
We do all this so you can enjoy the benefits of reliable engine performance and reduced exhaust emissions.

What is diesel exhaust fluid for?

Diesel exhaust fluid is a non-hazardous mixture of  32.5% urea and 67.5% deionized water.  Urea is a compound in Nitrogen that breaks to ammonia when heated.  Diesel exhaust fluid is initially comprised of (NH2)2CO.  When injected into the hot exhaust gas, the water evaporates leaving harmless components such as ammonia and isocyanic acid.
So, in these diesel vehicles, the exhaust gas from the engine is routed first through a particulate filter to catch all the soot and ash generated from burning what is a relatively impure fuel.  That takes care of the “rolling coal” aspect of old diesel engines that made them so unpopular before the ’90s.

From the particulate filter, the exhaust gas travels past a nozzle which sprays diesel exhaust fluid into the stream of gases.  The hot exhaust gas and DEF then enter the catalytic converter where the urea from the DEF and the exhaust gas react with a variety of metallic compounds to convert nitrogen dioxide and monoxide into nitrogen and water.  Nitrogen is the primary component of the air we breathe and is harmless to the environment.  Water is water.

Often, fluids also contain corrosion inhibitors.  This is because exhausts often contain a range of highly corrosive metals such as aluminum, cast iron, copper, brass, or solder.

Discover More about similar Quick Lube Shop Auto services

For your convenience, we provide online access to other similar services in 4 different locations on this site.  The first location is a grid below containing similar services to the one you are viewing.  The grid includes titles and pictures.  Just click the title or picture of the service you wish to discover more about.  That will link you to that service page.  Additionally, we have provided flip tabs located on either side of the page you are presently viewing.  Click either of these flip-forward or flip-backward tabs, to also see similar service pages.

To assist even further, we have listed similar services in the menu drop downs at the top of each page.  And finally, we have included a search bar in the menu at the top of the page to assist you in finding similar services by keyword.  Please use any of these 4 methods to help locate what you are looking for.  Of course, you can always go to our Contact Us page to get a map and contact information to ask directly for help.  In any case, we look forward to assisting you.

And don’t forget!  All these services are designed for both individual and fleet customers!  So, if you are a business with fleet vehicles, please drop by so we can set you up with a fleet account.  To learn more about this, please check out our Fleet Lube & Maintenance Services.

Why Do I Need a Diesel Exhaust Fluid Changes service?

The Diesel Exhaust Changes service is the replacement, changing, or flushing of your diesel exhaust fluid.  Clean fluid helps your vehicle exhaust system deliver lots of benefits.  For example, it keeps the system running better, it prevents corrosion inside the exhaust and unnecessary noise pollution.

We do these fluid changes so that our customers can avoid problems with the exhaust in their car, truck, or SUV.  The fluid is an important maintenance item responsible for ensuring your exhaust and the engine work well and do not break down.  This is because when fluid is clean it does its job better.  For example, it protects the exhaust system from contaminants that can cause major damage to the exhaust system and engine.

So, it is fair to conclude that dirty, contaminated fluid is NOT something you want to ignore.

That’s why we check the diesel exhaust fluid every visit.  We need to make sure that it is clean and functioning as it should.  We understand that it costs a little in the short run to change this fluid out.  But it saves a lot in the long run.

How Often Do I Need It?

The fluid should be checked each time you have service with Lube Stop.  And, of course, we should check it anytime you have observed issues.  Your owner’s manual will also advise you to do it at various intervals.  Please check your manual.

Also, lean on us at Lube Stop for advice.  We use a system of processes called Precision Based Recommendations to help investigate a vehicle’s overall condition.  This system of inspection and trouble shooting helps us get a clearer picture of your car, truck, or SUV as it stands, today.  That is because it removes the guess work.  Learn more about this system below.

Can Lube Stop do the Trouble Shooting?

Lube Stop employs the best technicians and mechanics in this service area.  These technicians are more than qualified to help inspect the issues and make recommendations to problem solve.

Which Towns and Cities are in our Fast Lube Service area?

Our lube shop & tire service area includes the following towns and cities listed below.

  • Blackfalds, Alberta
  • Clive, Alberta
  • Bentley, Alberta
  • Red Deer, Alberta
  • Ponoka, Alberta
  • Millet, Alberta
  • Rimbey, Alberta
  • Alix, Alberta
  • Penhold, Alberta
  • Benalto, Alberta
  • Hobbema, Alberta
  • Delburne, AB
  • Bluffton, Alberta
  • Innisfail, Alberta
  • Lousana, Alberta
  • Bashaw, Alberta
  • Leslieville, Alberta
  • Wetaskiwin, Alberta
  • Stettler, Alberta

Context for these Services

Your vehicle uses an internal combustion engine.  This engine uses the combustion of fuel to power almost everything.  This is done when fuel alongside an air oxidizer and spark plugs creates a working fluid flow circuit inside a combustion chamber.

In your internal combustion engine, the expansion of the high-temperature and high-pressure gases produced by combustion applies direct force to some component of the engine.  The force is applied typically to pistons, turbine blades, rotors and nozzles.  This force moves the component over a distance, transforming chemical energy into useful work.

Typically, your combustion engine is fed with fossil fuels like natural gas or petroleum products such as gasoline, diesel fuel or fuel oil.  Your engine is the hub for many things, including those listed below.

  • combustion chamber
  • cylinder head
  • camshaft
  • set of spark plugs
  • valvetrain
  • valves
  • rocker arms
  • pushrods
  • lifters
  • fuel injectors
  • pistons
  • connecting rods
  • engine block
  • crankcase
  • crankshaft
  • timing system
  • timing chain

All these work in unison to power all the other systems within your vehicle.  Without a fully functioning engine, everything else suffers.  So, let us at Lube Stop keep your engine functioning and everything else that relies on it.

Start typing and press Enter to search

lube stop tire lacombe oil change lube services fluid inspections changes flush fill differential fluid changes f1lube stop tire lacombe oil change lube services fluid inspections changes flush fill brake clutch fluid changes f1